Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Punto
  6. : How to remove the headlight of a Fiat Punto

Fiat Punto - Video tutorial

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Headlight
Operation: How to remove the headlight of a Fiat Punto

Let's see how to remove the headlight of a Fiat Punto. Let's open the bonnet and put it in safety; remove the front bumper (screws placed in the wheel arches) and unscrew the locking pins located above the headlight bar (socket wrench or cordless screwdriver). We detach the lamp holders from the headlight and extract the same from the car body. We assemble the new headlight with the new bulbs if damaged and (always suitable type and size) we insert the headlight in its housing. Finally we tighten the pins of the headlight with the socket wrench and mount the front bumper. We test the correct functioning of the lights.


Posted on 15 November 2023 by ScegliAuto



How to replace the headlight bulb of the Fiat Punto?
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In order to replace the Fiat Punto headlight bulb, access the rear part of the car headlight by opening the hood and accessing the engine compartment
How to disassemble the headlight of the Fiat Punto?
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Removing the headlight from the Fiat Punto is very simple, let's see how to proceed in this tutorial valid for the second and third series Punto. For
How to change the headlight bulbs of a Fiat Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Let's see how to change the bulbs located in the headlight of a Fiat Punto: open the front hood by pulling the lever located at the bottom right of t

Other guides that may interest you

    Frequently Asked Questions

    • Punto 2005-2018 - Where are the sidelights on Fiat Grande Punto? Read Answer
    • Punto 1999-2011 - How to remove the headlight on Fiat Punto mk2? Read Answer
    • Punto 2005-2018 - How much do the headlights of a used Fiat Punto cost? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos