Do it yourself
Frequently asked questions about cars and motorcycles

Where is the fuse box located in the Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuse box

See other generations:
Video tutorial

If you don't know where the fuse box of your new Fiat 500 is located, don't worry because in the following guide you will find all the information you need. Before proceeding, remember to keep the car completely off for the entire procedure for safety reasons.

Fully lift the bonnet and locate the battery. Immediately to its right is the fuse box. Unscrew the security bolt with an appropriate spanner and then remove the protective cover.

At this point, you will have the fuses in front of you and can carry out any maintenance work (not before disconnecting the battery).


Updated on 8 July 2026 by ScegliAuto


Related tutorials

Fiat 500 (2007-2022 / 312) Your new Fiat 500 contains two different fuse boxes. Below, you will find out how to easily locate them independently. Before carrying out any mainte…
Fiat 500 (2007-2021 / 312) The fuses in our Fiat 500 are located inside the fuse box. The fuse box is situated behind the glove compartment of the front passenger seat. To acce…
Fiat 500 (2014-2022 / 500 X) The fuse box on your Fiat 500X is located in the engine compartment, on the right side relative to the vehicle's battery. To access it, start by open…

    Frequently Asked Questions

    • 500 2012-2023 - Where is the fuse of the license plate light in the Fiat 500? Read answer

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos