Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Seicento
    4. : How to disassemble the instrument panel of the Fiat Seicento

Fiat Seicento - Video tutorial

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Instrument cluster
Operation: How to disassemble the instrument panel of the Fiat Seicento

Today's guide will show us the steps that will allow us to disassemble and replace the instrument cluster of the Fiat Seicento, following the instructions below. First of all, we get on board the car and start unscrewing all the fixing screws that we find on the side; then we disconnect the electrical connector that we find on the back, in order to remove it, as shown in the video. At this point we separate the instrument panel from the plastic cover of the dashboard, replacing or repairing it, applying the reverse procedure for reassembly!


Posted on 15 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Seicento 1998-2010 - What are the warning lights present on the dashboard of the Fiat Seicento? Read Answer
    • Seicento 1998-2010 - What does the injector warning light on the Fiat Seicento indicate? Read Answer
    • Seicento 1998-2010 - What does the power steering warning light on the Fiat Seicento indicate? Read Answer
    • Seicento 1998-2010 - Where are the spies of the Fiat Seicento shown? Read Answer
    • Seicento 1998-2010 - Where are the spies of the Fiat Seicento shown? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos