Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Clutch on the Fiat Seicento

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Clutch

In this guide, you will discover the main instructions to remove and replace the clutch discs on the Fiat Seicento. First, lift the vehicle and start draining the oil by unscrewing the bolt found on the sump; then remove the left front wheel and disconnect the front driveshaft by unscrewing the pins. At this point, unscrew the bolts of the engine mount to lower the gearbox from the chassis; then replace the clutch discs with new ones, following the tutorial video to the end for reassembly!

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on the Fiat Seicento
How to Replace the Clutch on the Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) This guide provides the main instructions on how to remove and replace the clutch kit on the Fiat Seicento. First, open the bonnet of the vehicle and…
How to Replace the Coolant in the Fiat Seicento
How to Replace the Coolant in the Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) This brief and simple guide provides instructions for replacing the coolant or antifreeze in the Fiat Seicento. First, drain the old antifreeze by di…
How to Remove the Instrument Cluster from the Fiat Seicento
How to Remove the Instrument Cluster from the Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) This guide will show you the steps to remove and replace the instrument cluster of the Fiat Seicento, following the instructions below. First, get in…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos