Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Fiat Doblo?

Model: Fiat Doblo Doblo 1, MK 1, 223 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Cabin air filter

See other generations:
Video tutorial

If you notice that the airflow from the air conditioning vents in your vehicle has decreased, it may be time to replace the air conditioning filter. The following description provides the steps to follow.

After accessing the cabin from the passenger side, locate the box containing the filter, which is situated just under the dashboard near the floor. Use a screwdriver to unscrew the fixing screw of the cover containing the filter.

Then, remove the cover and pull out the filter, replacing it with the new one, and finally, re-screw the fixing screw of the cover.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Fiat Doblo
How to Replace the Air Filter on a Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) Before you start, open the bonnet of your Fiat Doblo. Begin by unscrewing and removing the screws that secure the air filter cover. Next, unclip and …
How to Replace the Diesel Filter on the Fiat Doblò 1.3
How to Replace the Diesel Filter on the Fiat Doblò 1.3
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) Follow these instructions to remove and replace the diesel filter on the Fiat Doblò 1.3. First, open the bonnet of the vehicle and start unscrewing a…
Replace the Diesel Filter on a Fiat Doblo
Replace the Diesel Filter on a Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) Replace the diesel filter on a Fiat Doblo. Lift the front bonnet of the car and locate the diesel filter. Use a screwdriver to disconnect the fuel cl…

    Frequently Asked Questions

    • Doblo 2009-2021 - Where is the cabin or pollen filter located in a Fiat Doblò Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos