Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Suspension on a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Suspension system

In this video tutorial, you will see the main instructions for removing and replacing both the front and rear suspension on the Fiat Grande Punto, as well as the Punto Evo. First, open the bonnet of your car and start unscrewing the fastening nut located at the top of the suspension; then raise the vehicle and remove the front wheel, subsequently unscrewing the bolts of the suspension connected to the braking system, as shown in the video. At this point, remove and replace the shock absorber with the new one of the correct type; securely fit the new part and reassemble everything, following the video tutorial to the end!

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the cooling radiator of the Fiat Grande Punto
Replacement of the cooling radiator of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today's guide will show us how to disassemble and replace the engine cooling radiator of the Fiat Grande Punto. First, we open the hood and start by …
Replacing the Timing Chain of the Fiat Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide outlines the main steps to remove and replace the timing chain of the Fiat Grande Punto 1.3 MultiJet, as well as the Fiat Panda and Fiat 5…
Removing the Door Panel of the Fiat Grande Punto
Removing the Door Panel of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Briefly follow the instructions to remove and replace the door panel of the Fiat Grande Punto, as well as the Punto Evo. First, open the door and beg…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos