Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Diesel Filter on the Fiat 500 1.3 Multijet

Model: Fiat 500 312 - Years 2007-2022
Part: Diesel fuel filter

This guide shows you the steps to remove and replace the diesel filter on the Fiat 500 1.3 Multijet, following the instructions below. First, open the bonnet of your car and locate the diesel filter, which is found at the top left; then disconnect the diesel pipe and undo the screws of the brackets to remove the filter cartridge, as shown in the video. At this point, replace and install the new original diesel filter; reconnect the diesel pipe and securely fasten the original bracket!

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2021 / 312) In this video tutorial, you will learn how to replace the diesel filter on a Fiat 500 1.3 MultiJet. First, open the bonnet and locate the diesel filt…
Fiat 500 (2014-2022 / 500 X) To replace the diesel filter on the Fiat 500X, open the bonnet to access the engine compartment: the diesel filter is located inside, at the top left…
Fiat 500 (2014-2022 / 500 X) In this brief and simple guide, learn how to remove and replace the engine air filter in the Fiat 500 X with a 1.3 MultiJet engine. First, open the b…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos