Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Properly Apply a Graphic Sticker on the Side of a Fiat 500

Model: Fiat 500 312 - Years 2007-2022
Part: Body

In this video, learn how to properly apply a decorative sticker on the side of a Fiat 500. You can purchase dedicated graphics on the website demongraphics.co.uk by typing in the car model you are looking for and selecting "all graphics" from the dropdown menu. The decoration shown in the video costs £25. Before applying the sticker, a thorough cleaning of the bodywork is necessary; get assistance to correctly position the strip, which we will secure with masking tape. Once you have confirmed that the position is correct, proceed to remove the lower protection to stick the strip to the bodywork; use a scraper to ensure the glue adheres well and to avoid air bubbles. Use a craft knife to trim any excess parts and cut the strip where necessary for the bodywork. Now remove the upper protection and check for any air bubbles. If there are any, pierce them and let the air escape upwards.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Side Window on the Fiat 500
Replacing the Rear Side Window on the Fiat 500
Fiat 500 (2007-2021 / ) In this video tutorial, you will learn how to remove the panel and the rear side window on the Fiat 500, following the instructions below. To remove …
How to Remove the Door Handle on Fiat 500
How to Remove the Door Handle on Fiat 500
Fiat 500 (2007-2024 / 312) Here's how to remove the door handle from the right front door on a Fiat 500: disconnect the battery terminals located in the engine bay (if you need…
How to Remove the Door Panel on a Fiat 500
How to Remove the Door Panel on a Fiat 500
Fiat 500 (2007-2024 / 312) How do you remove the door panel on a Fiat 500? Before starting the disassembly work, disconnect the battery terminals located in the engine bay. Usi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos