Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Logo on the Grande Punto - and Bodywork Touch-ups

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Manufacturer emblem

See other generations:
Video tutorial

In this video, see how to replace the logo on the Grande Punto and perform minor bodywork repairs. First, check for any small rust spots.

Isolate them with masking tape and use 1000 grit sandpaper to remove the rust. If the metal is exposed, apply a drop of anti-rust primer.

If possible, speed up the drying with a hairdryer. While this dries, focus on the logo.

Heat it with the hairdryer to loosen it. Use a plastic lever to remove the old logo. Remove the adhesive with a rubber wheel mounted on a drill, then degrease with a silicone remover.

Now, apply the new logo. You may have purchased it on Amazon for £16.99, delivery included.

First, heat the metal to improve adhesion, then remove the backing from the adhesive tape and stick it on. Now return to the rust spot: smooth the primer with 1000 grit sandpaper and water, and clean with silicone remover. Apply a first and then a second coat of paint, followed by a clear coat.

Finally, polish the entire rear bonnet with hard paste and pad. Then switch to medium paste and pad. Finish with a polishing compound.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

Replacing the Front Badge/Logo on a Fiat Grande Punto
Replacing the Front Badge/Logo on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial, you will learn how to remove and replace the badge or logo of the manufacturer on a Fiat Grande Punto, as well as on a Punto Evo. F…
How to disassemble the front bumper of the Fiat Grande Punto
How to disassemble the front bumper of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's instructions will guide us through the process of disassembling and replacing the front bumper of the Fiat Grande Punto. First, we open the h…
How to Remove the Rear Lights on a Fiat Grande Punto?
How to Remove the Rear Lights on a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This tutorial shows how to remove the rear lights on a Fiat Grande Punto, a very simple and quick operation. First, ensure that the key is not insert…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos