Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Seat on a Fiat Ducato

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Seat

See other generations:
Video tutorial

To replace the front seat on a Fiat Ducato, first unscrew the bolts that secure the seat to its support: these bolts are located at the front and rear of the seat. Once these bolts are loosened, disconnect the connector located under the seat so that it can be completely removed.

Next, loosen the bolts that secure the lower support, again unscrewing the bolts located at the front and rear: this will allow you to properly connect and secure the seat.


Updated on 17 August 2026 by ScegliAuto


Related tutorials

Removing the Front Seat on the Fiat Ducato Camper
Removing the Front Seat on the Fiat Ducato Camper
Fiat Ducato (2006-2014 / X250) In this video tutorial, you will see how to remove and reinstall the driver's seat on the Fiat Ducato Camper, as well as on the Citroen Jumper and Pe…
How to repair and adjust the handbrake of the Fiat Ducato
How to repair and adjust the handbrake of the Fiat Ducato
Fiat Ducato (2014-2026 / X290) Today we will discover the instructions that will allow us to disassemble and repair the handbrake of the Fiat Ducato, as well as the RAM Promaster, …
How to Clean the Water Filter of a Fiat Ducato Rimor
How to Clean the Water Filter of a Fiat Ducato Rimor
Fiat Ducato (2002-2006 / ) Before you can begin, enter the living area of your Fiat Ducato Rimor and remove the bench seat from the main table by simply lifting it. Start by di…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos