Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Mirror on a Fiat Ducato that is Unstable

Model: Fiat Ducato X290 - Years 2014-2026
Part: Side mirror

In this video, see how to adjust the external mirror of the Fiat Ducato camper, in case it is unstable during travel: remove the upper plastic of the mirror; do not use screwdrivers, as you may break it. Simply press it from both sides. It is a push-fit, so it will come off this way. For a proper job, you should remove the small cross-head screw to take off the outer plastic as well, but if you are travelling and lack the necessary tools, you can manage without it by using a small screwdriver to tighten or loosen the mirror as needed. To do this, position the mirror correctly and adjust the screw with the large washer, then replace the plastic and continue your journey.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Wing Mirror from a Fiat Ducato X250
Removing the Wing Mirror from a Fiat Ducato X250
Fiat Ducato (2006-2014 / X250) Today you will learn how to remove the external wing mirror from a Fiat Ducato X250 by following these simple instructions. Open the front door first…
How to Remove the Wing Mirror on a Fiat Ducato
How to Remove the Wing Mirror on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Learn how to remove the external rear-view mirror on a Fiat Ducato. First, remove the switch panel located on the door panel, then unscrew the securi…
How do you replace the external rearview mirror of the Fiat Ducato?
How do you replace the external rearview mirror of the Fiat Ducato?
Fiat Ducato (2006-2014 / X250) It will be possible to replace the external rearview mirror of the Fiat Ducato by loosening the screws that fix the inner door panel: once all these …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos