Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Wishbone Bushes on a Fiat Idea

Model: Fiat Idea MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Control arm

Video tutorial

The failure of the bushes (silent blocks) of the suspension wishbones, the corresponding ball joint, and the support rubbers of the stabiliser bar is a common fault in many car models. In this case, you can choose to replace only the bushes on the same wishbones or the entire wishbones.

The latter option is suggested due to the relatively low cost of the replacement part, and it is advisable to intervene on both wheels. Once the vehicle is lifted and the front wheels are removed, undo the nut securing the wishbone ball joint to the hub, extract it using a fork tool, and then remove the fixing pins of the other two bushes.

Proceed in reverse for the installation of the new one.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Fiat Idea (2003-2016 / MK 1) Before you begin, sit in the driver's seat of your Fiat Idea. Start by activating the instrument panel. Then, press the "mode" button located to the …
Fiat Idea (2003-2016 / MK 1) In this mini guide dedicated to your Fiat Idea Mk2, we will discover where the fuse box is located. Before starting, remember that any replacement or…
Fiat Idea (2003-2016 / MK 1) In this new guide aimed at all of you who own a Fiat Idea, we will help you safely locate the box containing all the fuses of the car. First of all, …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Spare Wheel from the Citroen C4 Picasso

Follow these instructions to remove the spare wheel and replace it on the Citroen C4 Picasso. On this model, the spare wheel is located under the vehicle's floor; to lower it, simply unscrew the bolt to loosen the strap, then disconnect it from the spare wheel, as shown in the video. At this point, lift the vehicle and remove the wheel, securing the spare wheel or space-saver; tighten the bolts in a criss-cross pattern, finally placing the old wheel back under the vehicle's floor!

Watch the video!


by ScegliAuto

More videos