Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light on the Fiat Idea

Model: Fiat Idea MK 1 - Years 2003-2016
Part:

In today's video, you will see how to replace the bulbs of the third brake light on the Fiat Idea. First, open the rear hatch. Unscrew the two screws of the plastic cover located at the top and then detach it. Next, disconnect the power cables and supports to access the third brake light more easily. Once you have it in hand, you can replace the bulbs, specifically five units. They are standard W5W bulbs. Once done, reconnect the power to test its proper functioning. If all is well, proceed to close it following the previous steps.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Stop Light Bulb on the Fiat Idea?
How to Replace the Stop Light Bulb on the Fiat Idea?
Fiat Idea (2003-2016 / MK 1) If there is an issue with the stop light bulb or any other anomaly related to the rear lighting, you will need to disassemble the light unit. This vi…
How to Change the Time on a Fiat Idea
Fiat Idea (2003-2016 / MK 1) Before you begin, sit in the driver's seat of your Fiat Idea. Start by activating the instrument panel. Then, press the "mode" button located to the …
How to Repair the Brake Light on a Fiat Idea
Fiat Idea (2003-2016 / MK 1) If activating the indicator causes the brake light to flash, it indicates a so-called false contact issue in the power connector of the lamp. Open th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos