Do it yourself
Frequently asked questions about cars and motorcycles

How to Repair the Brake Light on a Fiat Idea

Model: Fiat Idea MK 1 - Years 2003-2016
Part: Tail light

If activating the indicator causes the brake light to flash, it indicates a so-called false contact issue in the power connector of the lamp. Open the boot, remove the cover located directly opposite the lamp housing on the interior trim, and disconnect the power connector of the lamp. You will immediately notice that one of the terminals inside the connector is oxidised. Open the lock that holds the terminals in place and remove the damaged one to replace it with a new one.

Updated on 25 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Fiat Idea (2003-2016 / MK 1) In today's video, you will see how to replace the bulbs of the third brake light on the Fiat Idea. First, open the rear hatch. Unscrew the two screws…
Fiat Idea (2003-2016 / MK 1) If there is an issue with the stop light bulb or any other anomaly related to the rear lighting, you will need to disassemble the light unit. This vi…
Fiat Idea (2003-2016 / MK 1) Before you begin, sit in the driver's seat of your Fiat Idea. Start by activating the instrument panel. Then, press the "mode" button located to the …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos