Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wipers on a Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Windshield wipers

In this tutorial, you will see how to replace the wipers on a Fiat 500, a very simple and quick operation. First, ensure that the wipers are in the resting position; if not, activate them and stop them as soon as this position is reached. Then, lift the first wiper, open the release lever, rotate the blade approximately 90 degrees outward, and disengage it from the arm. Next, position the replacement, secure the pin to the corresponding hook, and tighten the lever. At this point, simply repeat the operation on the opposite side if necessary.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Blades on a Fiat 500
How to Replace the Wiper Blades on a Fiat 500
Fiat 500 (2007-2021 / ) To replace the wiper blades on a Fiat 500, lift the wiper arm and press the pin that connects the blade to the arm. This will allow you to slide the …
How to Replace the Wiper Blades on the Fiat 500 L
How to Replace the Wiper Blades on the Fiat 500 L
Fiat 500 (2012-2023 / 500 L) In today's video tutorial, you will find instructions on how to remove and replace the wiper blades on the Fiat 500 L in simple and quick steps. Firs…
How to replace the rear windshield wiper of the Fiat 500
How to replace the rear windshield wiper of the Fiat 500
Fiat 500 (2007-2024 / 312) Below we will discover the steps that will allow us to disassemble and replace the rear windshield wiper or rear wiper of the Fiat 500. First, move t…

    Frequently Asked Questions

    • 500 1957-1975 - Where can you find the window washer bag of the vintage Fiat 500? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos