Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Fiat Scudo?

Model: Fiat Scudo MK 1 - Years 1996-2007
Part: Service warning light

In order to reset the Service light of the Fiat Scudo, you must press and hold the button located on the right side of the instrument panel while it is turned off. By continuing to hold down the button, you will be able to insert the ignition key into the ignition switch so that you can turn on the instrument panel. Once the panel is turned on, you will notice a countdown starting from ten. At the end of this countdown, you can release the button to verify that everything is functioning properly.

Posted on 1 March 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Fiat Scudo?
How do you reset the Service light on the Fiat Scudo?
Fiat Scudo (2007-2016 / MK 2) In order to reset the Service light on the Fiat Scudo, you need to turn on the instrument panel by inserting the ignition key into the slot: once the…
How to reset the service light on the 2007 Fiat Scudo
How to reset the service light on the 2007 Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) The steps to reset the service light of the 2007 Fiat Scudo are as follows: - get into the vehicle and close all doors; - turn on the instrument pane…
How to reset the Fiat Scudo oil light
Fiat Scudo (1996-2007 / MK 1) The service light that comes on on the instrument panel of your Fiat Scudo Mk1 is fortunately just a reminder that you need to have your vehicle serv…

Removing VW Passat Interior Lights

Below is how to replace the bulbs in all the interior lights of this vehicle. For the lights on the roof, use a flathead screwdriver to gently lever at the side where you will release the retaining clip, pull it out, and after replacing the bulb, press it back into place. For the light above the front seats, lever (with the flathead screwdriver) directly on the transparent plastic to detach it from the retaining tabs (replace the bulbs and press it back into place). For the rear light and number plate lights, perform the same operation: lever to release the tab, replace, and press back into place.

Watch the video!


by ScegliAuto

More videos