Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Scudo
  6. : How to reset the Fiat Scudo oil light

Fiat Scudo - Video tutorial

Model: Fiat Scudo MK 1 - Years 1996-2007
Part: Instrument cluster
Operation: How to reset the Fiat Scudo oil light

The service light that comes on on the instrument panel of your Fiat Scudo Mk1 is fortunately just a reminder that you need to have your vehicle serviced. In this new guide of ours we will explain to you how to reset it manually. First, go inside the Fiat Scudo and make sure it is completely off. Then locate the button located to the right of the mini display and hold it down. At the same time insert the key and turn on the ignition. Wait for the ten second countdowns to finish and finally release the button to complete the reset.


Posted on 24 April 2023 by ScegliAuto

This video is currently unavailable


Resetting the service light of the Fiat Scudo.
Fiat Scudo (2007-2016 / MK 2) We will briefly show you the necessary procedure to reset the service light for the regular maintenance of the engine oil change in the Fiat Scudo. F
Fiat Scudo service reset
Fiat Scudo (2007-2016 / MK 2) Do you have a Fiat Scudo and do the service yourself, but you don't know how to reset the service warning light once it is done? Nothing could be sim
How to reset the Fiat Scudo service light
Fiat Scudo (2007-2016 / MK 2) In this new mini guide on the 2010 Fiat Scudo we will discover a method that is as simple as it is effective that will allow you to reset the mainten

    Frequently Asked Questions

    • Scudo 2007-2016 - Why does the ESP warning light on the Fiat Scudo 2007 come on? Read Answer
    • Scudo 2007-2016 - What are the warning lights on the dashboard of the Fiat Scudo? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos