Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Fiat Ducato Camper?

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Cabin air filter

See other generations:
Video tutorial

Replacing the cabin filter in a Fiat Ducato camper, as shown in this tutorial, is a very simple and quick task. First, position yourself in the driver's seat, then remove the two cup holder housings and undo the newly exposed screw.

Next, unclip both small indicated caps, unscrew any additional fixing screws, and separate the entire cover from the centre console. At this point, you can remove the inner frame, open the long rectangular door, and extract the old filter.

To reassemble everything, simply follow the reverse procedure.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Filter on a Fiat Ducato Camper
How to Replace the Oil Filter on a Fiat Ducato Camper
Fiat Ducato (2014-2026 / X290) The procedure for replacing the oil filter on a Fiat Ducato camper may seem lengthy and difficult to do yourself, but with our tutorial, you will see…
Where is the fuse box located in the Fiat Ducato camper?
Where is the fuse box located in the Fiat Ducato camper?
Fiat Ducato (2006-2014 / X250) The Fiat Ducato camper has two fuse boxes inside. The first fuse box is located within the cabin, specifically under the dashboard near the driver's …
How to Change the Reverse Light Switch in a Fiat Ducato Camper
How to Change the Reverse Light Switch in a Fiat Ducato Camper
Fiat Ducato (2002-2006 / ) This video tutorial explains how to change the reverse light switch in a Fiat Ducato camper if it fails. Sometimes, the wire on the connector located…

How to reset the tyre pressure warning light on the Dacia Sandero?

The tyre pressure warning light that appears on the instrument cluster of the Dacia Sandero can be reset by inflating the tyres until they reach the correct pressure value: this value is indicated on the sticker attached to the driver’s door pillar. Once the inflation is complete, navigate through the menu that appears on the instrument cluster to find the option related to the tyres: select this with the OK button, which should then be held down for a few seconds to completely turn off the light.

Watch the video!


by ScegliAuto

More videos