Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light of the Fiat seicento

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Tail light

If it happens that the rear light bulbs do not turn on, it is very likely that there may be an oxidation problem in the relative power connector of the light itself; it is therefore necessary to proceed with the dismantling of the lighthouse but it is an extremely simple procedure; in fact, it is sufficient to open the rear hood and unscrew the two fixing screws of the headlight located on the upper band; once the screws have been removed, rotate the upper part of the headlight to extract the two lower tabs and move it far enough away to disconnect the socket; at this point, remove the oxidation from the contacts with the special spray and check the condition of the bulbs before reassembling.


Posted on 21 September 2023 by ScegliAuto



How to remove the headlight of a Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) Before starting, we will have to open the front hood of our Fiat Seicento. So let's start by unscrewing and removing the bolts that secure the headli
How to remove the door panel of a Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) Before we can start, we will have to go and open the door of our Fiat Seicento. So let's start by unscrewing and removing the screws that secure the
How to replace the rear shock absorbers of the Fiat Seicento?
Fiat Seicento (1998-2010 / MK 1) In order to replace the rear shock absorbers of the Fiat Seicento, you have to go and lift the car with a jack so that the rear wheels do not touch t

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos