Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fold the Rear Seats on a Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Seat

See other generations:
Video tutorial

To fold the rear seats of a Fiat Punto, follow these general steps. Open the boot: this will give you access to the levers or buttons that control the seats.

Alternatively, you can access them from the side doors. Look for the release levers: these are usually found on the sides of the rear seats or between the seat cushions and the backrest.

Unlock the seats: pull the levers or press the buttons to unlock the seats. On most Fiat Puntos, there are buttons on the sides of the headrests.

Lower the seats: fold the seats down until they lock into the new position.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How to repair the front seat release mechanism of the Fiat Grande Punto
How to repair the front seat release mechanism of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Below we will see the instructions that will allow us to repair the release mechanism of the backrest of the front seat of the Fiat Grande Punto. Fir…
Removing the Rear Seats from Your Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Are you planning to remove the rear seats from your Fiat Grande Punto? This video explains how to do it. After removing the rear seat base, use a soc…
How to open the trunk of a Fiat Punto that does not open with the remote control.
How to open the trunk of a Fiat Punto that does not open with the remote control.
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, we see how to open the rear trunk of a Fiat Punto that cannot be opened with the remote control from the outside. We need to enter the…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos