Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Seats from Your Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Seat

Are you planning to remove the rear seats from your Fiat Grande Punto? This video explains how to do it. After removing the rear seat base, use a socket wrench to unscrew the metal guides attached to the car's floor (repeat this operation on the other half of the seat). After removing the guides, move on to the guides on the sides of the backrest: remove the metal guides located at both ends of the backrest, using plastic or metal levers for assistance. Extract the two backrests from the vehicle body. Install the new rear seats by reversing the previous steps.

Updated on 28 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Rear Seats from a Fiat Grande Punto?
How to Remove the Rear Seats from a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To remove the rear seats from a Fiat Grande Punto, loosen all the bolts located at the bottom of the cushions that secure their supports. Once these …
How to Replace the Seat Cables on a Fiat Grande Punto?
How to Replace the Seat Cables on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the cables that allow the seat to tilt in the Fiat Grande Punto, first loosen the bolts securing the seat and remove it from the cabin for…
Removing the Rear Seats from a Fiat Grande Punto
Removing the Rear Seats from a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to remove the rear seats from a Fiat Grande Punto in simple steps. First, access the rear; then remove the…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos