Do it yourself
Frequently asked questions about cars and motorcycles

How to Fix the Hill Holder and ESP Warning Light on the Fiat Punto MK3

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Warning light – error code

See other generations:
Video tutorial

If the Hill Holder and ESP warning lights illuminate on the dashboard of the Fiat Punto MK3, you can turn them off by watching this video: the solution is to replace a fuse, which can be found in the owner's manual. The culprit for all these issues is fuse number 10, rated at 7.5 Amperes, located in the dashboard inside the cabin.

The manual also provides the exact position of the fuse to be replaced, which is shown vertically in the diagram. Once the blown fuse is replaced, the warning lights will turn off automatically.


Updated on 12 October 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, we will look at a reason why the ESP light may come on in the Fiat Grande Punto. The reason is a broken wire (specifically, the ground…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, we see a possible solution to resolve the grandcheck error on the Fiat Grande Punto: this error is a generic message that appears on t…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Below are the steps to reset the airbag light on the Fiat Punto Evo, as well as the Grande Punto and other models from the manufacturer. First, ensur…

    Frequently Asked Questions

    • Punto 2005-2018 - What does the steering wheel light on the Fiat Punto indicate? Read answer
    • Punto 2005-2018 - What does the ESP and Hill Holder light on the Grande Punto mean? Read answer
    • Punto 2005-2018 - How to reset the car radio in the Fiat Punto? Read answer
    • Punto 2005-2018 - What does the yellow triangle warning light mean in the Fiat Grande Punto? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos