Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Deactivate the Airbag Light on the Fiat Punto Evo

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Warning light – error code

Below are the steps to reset the airbag light on the Fiat Punto Evo, as well as the Grande Punto and other models from the manufacturer. First, ensure that the airbag issue causing the light to illuminate has been resolved; then connect your diagnostic software to the OBD port located on the vehicle. At this point, select the make, model, and engine type, then perform a scan for errors and subsequently reset the airbag light by following the guided procedure.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to deactivate the front passenger airbag of the Fiat Punto Evo
How to deactivate the front passenger airbag of the Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today we will discover the instructions that will allow us to deactivate the front passenger airbag of the Fiat Punto Evo, in simple and quick steps.…
How to Disable the Passenger Airbag on the Fiat Grande Punto
How to Disable the Passenger Airbag on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Here are the steps to disable the front passenger airbag on the Fiat Grande Punto. First, get into the vehicle and start the engine; then press the m…
How to Activate or Deactivate the Passenger Airbag on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this short video tutorial, see how to activate or deactivate the passenger airbag on a Fiat Grande Punto, a model produced from 2005 to 2018. Firs…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - What does the ESP and Hill Holder light on the Grande Punto mean? Read answer
    • Punto 2005-2018 - How to reset the car radio in the Fiat Punto? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos