Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. F 250
    4. : Checks and maintenance

Ford F-250 - Checks and maintenance

Checks And Maintenance Ford F-250 (2011-2016 / p 473)

Ford F-250 (2011-2016 / P473)
How to Remove the Headlight Switch on a Ford F-250?
To remove the headlight switch on a Ford F-250, detach the panel located at the bottom of the steering column; this will allow you to unscrew the screws …Read all…
Posted on 11 July 2026 by ScegliAuto
Ford F-250 (2011-2016 / P473)
How to Adjust the Steering on a Ford F-250
To adjust the steering on a Ford F-250, you only need a set of sockets. Position yourself under the vehicle and locate the front axle where you will make your …Read all…
Posted on 26 July 2026 by ScegliAuto
Airbag (1) Alternator (1) Shocks (1) Car stereo (3) Battery (1) Spark plugs (1) Body (2) Key (8) V-belt (2) Onboard computer (1) Checks and maintenance (2) Bearing (2) Brake rotors (1) Headlight (1) Tail light (2) Fog lights (2) Air filter (7) Cabin air filter (4) Diesel fuel filter (4) Grille (3) Light bulb (2) Side marker bulb (3) Headlight bulb (2) Tail light bulb (3) License plate light (1) Handle (2) Engine oil (3) Door trim panel (2) Front bumper (1) Rear bumper (1) Brake pads (4) Power window switch (1) Fuse box (17) Suspension system (2) Side mirror (2) AdBlue warning light (2) Warning light – error code (6) Tire pressure warning light (2) Service warning light (14) Brake drums and shoes (1) Windshield wipers (1) Tie rods (1) Drivetrain (1) Blower motor (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos