Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Steering on a Ford F-250

Model: Ford F-250 P473 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

To adjust the steering on a Ford F-250, you only need a set of sockets. Position yourself under the vehicle and locate the front axle where you will make your adjustments.

Remove the bolt and move the clip to lift or lower the axle. During this procedure, it will help to have a second person check the alignment from inside the cab. Now, rotate the bolts on the axle near the wheel.

You may need some WD-40 to make this easier. Turn them in the direction you want the wheel to go: up to turn it right, down to turn it left.

Finally, tighten the bolts and reinsert the clip.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

Ford F-250 (1999-2007 / Phn131) This guide shows you how to remove and replace the steering linkage on a Ford F-250, following the instructions below. First, lift the vehicle and st…
Ford F-250 (2011-2016 / P473) To remove the steering wheel airbag from a Ford F-250, detach the plastic covers that wrap around the steering column so they can be completely remov…
Ford F-250 (2017-2022 / P558) In this tutorial, you will see how to remove the steering wheel on a Ford F-250 pickup, a very simple operation. Before doing this, disconnect the ne…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Front Headlamp Bulb in a Kia Stonic?

Regardless of the type of bulb to be used, for example, the video shows how to install an H7 in a headlamp that involves similar work steps to the Kia Stonic, it is important to ensure that the instrument panel and lights are turned off. To replace the front headlamp bulb on the vehicle in question, open the bonnet, remove the plastic rear cap of the headlamp unit, unclip the metal fastener, and extract the bulb holder. Finally, simply remove the bulb to be replaced from the holder, insert the new one, and reassemble everything.

Watch the video!


by ScegliAuto

More videos