Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Linkage on a Ford F-250

Model: Ford F-250 Phn131 - Years 1999-2007
Part: Tie rods

This guide shows you how to remove and replace the steering linkage on a Ford F-250, following the instructions below. First, lift the vehicle and start by loosening the nut on the pin of the steering linkage using a socket wrench, as shown in the video. Next, disconnect the steering linkage and replace it with the new, original part. Finally, tighten the bolt to complete the installation, and repeat the same procedure for the other steering linkage!

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery on Ford F-250
How to Replace the Key Fob Battery on Ford F-250
Ford F-250 (2017-2022 / P558) As shown in this tutorial, replacing the battery in the Ford F-250 key fob is a very simple and quick task. For this, you will need a replacement CR2…
Replacing the Front Fog Light Bulbs on the Ford F-250
Replacing the Front Fog Light Bulbs on the Ford F-250
Ford F-250 (2011-2016 / P473) Discover step-by-step instructions to remove and replace the front fog light bulbs on the Ford F-250. First, move to the front of your vehicle; unscr…
How to Replace the Rear Shocks on the Ford F-250
How to Replace the Rear Shocks on the Ford F-250
Ford F-250 (1999-2007 / Phn131) In this brief and simple guide, follow the steps to remove and replace the rear shocks on the Ford F-250. First, lift the vehicle and start by loosen…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos