Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Ford F-250?

Model: Ford F-250 P558 - Years 2017-2022
Part: Air filter

To replace the cabin air filter on a Ford F-250, open the glove compartment on the passenger side and lower the side flaps to remove the entire glove box. Once removed, loosen the two 7 mm screws underneath to take off the plastic panel. Behind this panel, you will find the protective cover for the cabin air filter, which can then be pulled out of its housing and replaced with a new part. After replacing the filter, reattach the cover and the glove compartment.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Ford F-250
How to Replace the Air Filter on a Ford F-250
Ford F-250 (2011-2016 / P473) To replace the cabin filter on a Ford F-250, open the hood to locate the filter box inside the engine compartment: it is positioned at the front, nea…
How to Change the Cabin Air Filter in a Ford F-250
How to Change the Cabin Air Filter in a Ford F-250
Ford F-250 (2017-2022 / P558) In this guide, discover how to remove and replace the cabin air filter in a Ford F-250. First, open the front passenger door and start opening the gl…
Replace the Fuel Filter on a Ford F-250 6.4 Diesel
Replace the Fuel Filter on a Ford F-250 6.4 Diesel
Ford F-250 (2011-2016 / P473) This guide shows how to remove and replace the fuel filter on a Ford F-250 6.4 Diesel in simple and quick steps. First, lift the vehicle and drain th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos