Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the Ford F-250 [USA]

Model: Ford F-250 P558 - Years 2017-2022
Part: Air filter

To replace the cabin air filter, open the passenger side door and the glove compartment located under the dashboard on the passenger side. Release the sliding guide of the glove box by prying with a finger on the outer side of the guide. On the upper side of the glove compartment, there is a plastic strip that needs to be detached, underneath which are two screws to remove. Pry and pull out the cover, then remove the additional cover to access the filter housing. Pull out the filter and replace it with the new one (identify the suitable filter type for your vehicle, see the owner's manual). Finally, reverse all the steps to reassemble the various components.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Ford F-250
How to Replace the Air Filter on a Ford F-250
Ford F-250 (1999-2007 / Phn131) To replace the air filter on a Ford F-250, open the hood to access the engine compartment: the air filter is located inside, directly under the coola…
How to Change the Cabin Air Filter in a Ford F-250
How to Change the Cabin Air Filter in a Ford F-250
Ford F-250 (2017-2022 / P558) In this guide, discover how to remove and replace the cabin air filter in a Ford F-250. First, open the front passenger door and start opening the gl…
How to Replace the Air Filter on a Ford F-250
How to Replace the Air Filter on a Ford F-250
Ford F-250 (2011-2016 / P473) To replace the cabin filter on a Ford F-250, open the hood to locate the filter box inside the engine compartment: it is positioned at the front, nea…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos