Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. F 350
  6. : Car stereo

Ford F-350 - Car stereo

Ford F-350 (1999-2007 / Phn131)
How to replace the Ford F 350 car radio

Removing the car stereo in this type of vehicle is pretty quick and easy. Before starting with the actual removal, make sure that the car engine is off and …read all…
Posted on 27 November 2022 by ScegliAuto
Ford F-350 (2008-2010 / P356)
How to install a double DIN car stereo on the Ford F 350

In order to replace the standard car radio with a double DIN model, it is necessary to proceed as follows: first you need to remove the dashboard panel that …read all…
Posted on 4 May 2024 by ScegliAuto
Ford F-350 (2008-2010 / P356)
How to replace the car stereo in the Ford F 350

In today's video we see how to replace the stock car stereo in the Ford F-350. We remove the two plastic parts at the base of the center console, using a …read all…
Posted on 19 April 2024 by ScegliAuto
Ford F-350 (2011-2016 / P473)
How to replace the car radio of the Ford F-350

Let's start by removing the two on the sides of the center console, disconnecting the connectors. Now we can unscrew the two support screws of the bezel. Let's …read all…
Posted on 15 April 2024 by ScegliAuto

Loudspeaker (1) Shock absorbers (1) Car stereo (4) Battery (1) Key (7) V-belt (1) -board computer (2) Checks and maintenance (5) Dashboard (1) Bearing (2) Brake discs (2) Headlight (4) Fog lights (1) Air filter (7) Cabin air filter (3) Diesel filter (2) Light bulb (3) Headlight bulb (3) Rear light bulb (3) License plate light (1) Starter motor (1) Engine oil (5) Door panel (2) Front bumper (1) Rear bumper (1) Brake pads (3) Instrument cluster (2) Wheel (1) Fuse box (7) Suspensions (1) Outside rearview mirror (3) Windscreen wipers (1) Steering rods (1) Transmission (1) Windshield washer nozzle (1) Steering wheel (1)

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos