Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. F 350
  6. : Headlight

Ford F-350 - Headlight

Ford F-350 (1999-2007 / Phn131)
How to remove the headlights of the Ford F-350 PHN 131

Let's see in this video the main instructions on how to remove and replace the headlights of the Ford F-350 PHN 131, in simple steps. First we open the engine …read all…
Posted on 25 July 2022 by ScegliAuto
Ford F-350 (2017-2023 / P558)
How to disassemble the headlight of the Ford F350 Super Duty p558

This guide shows how to replace the headlight on the Ford F350 Super Duty p558. After opening the bonnet and removing the radiator protective panel, remove the …read all…
Posted on 25 November 2022 by ScegliAuto
Ford F-350 (1987-1991 / )
How to renew the headlights of the Ford F 350

The headlights can tend to yellow and become opaque due to the action of the sun, atmospheric agents, car wash products but it is possible to make them shine …read all…
Posted on 17 June 2022 by ScegliAuto
Ford F-350 (2008-2010 / P356)
How do you remove the headlight of the Ford F-350?

In order to remove the front headlight of the Ford F-350 you need to open the hood, so that you can loosen the screws that secure the front grille at the top. …read all…
Posted on 7 April 2024 by ScegliAuto

Loudspeaker (1) Shock absorbers (1) Car stereo (4) Battery (1) Key (7) V-belt (1) -board computer (2) Checks and maintenance (5) Dashboard (1) Bearing (2) Brake discs (2) Headlight (4) Fog lights (1) Air filter (7) Cabin air filter (3) Diesel filter (2) Light bulb (3) Headlight bulb (3) Rear light bulb (3) License plate light (1) Starter motor (1) Engine oil (5) Door panel (2) Front bumper (1) Rear bumper (1) Brake pads (3) Instrument cluster (2) Wheel (1) Fuse box (7) Suspensions (1) Outside rearview mirror (3) Windscreen wipers (1) Steering rods (1) Transmission (1) Windshield washer nozzle (1) Steering wheel (1)

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos