Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. F 350
    4. : Headlight bulb

Ford F-350 - Headlight bulb

Ford F-350 (1999-2007 / Phn131)
How to replace the front headlight bulb on a Ford F 350.
If we need to disassemble and replace the front headlight on this car model, in the description reported below we will find the necessary information and steps …read all…
Posted on 1 April 2023 by ScegliAuto
Ford F-350 (2008-2010 / P356)
How to replace the headlight bulb on Ford F-350 (2008)
In this video tutorial we will see how to remove and replace the headlight bulb of the Ford F-350, following these simple steps. First of all we open the …read all…
Posted on 30 June 2022 by ScegliAuto
Ford F-350 (2011-2016 / P473)
How to replace the headlight bulb on the Ford F-350?
In order to replace the headlight bulb of the Ford F-350 you need to open the hood so that you can loosen the screws located in the upper and internal part of …read all…
Posted on 4 April 2024 by ScegliAuto
Loudspeaker (1) Shock absorbers (1) Car stereo (4) Battery (1) Key (7) V-belt (1) -board computer (2) Checks and maintenance (5) Dashboard (1) Bearing (2) Brake discs (2) Headlight (4) Fog lights (1) Air filter (7) Cabin air filter (3) Diesel filter (2) Light bulb (3) Headlight bulb (3) Rear light bulb (3) License plate light (1) Starter motor (1) Engine oil (5) Door panel (2) Front bumper (1) Rear bumper (1) Brake pads (3) Instrument cluster (2) Wheel (1) Fuse box (7) Suspensions (1) Outside rearview mirror (3) Windscreen wipers (1) Steering rods (1) Transmission (1) Windshield washer nozzle (1) Steering wheel (1)

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos