Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. F 350
    4. : Brake pads

Ford F-350 - Brake pads

Ford F-350 (2017-2023 / P558)
How do you replace the front brake pads of the Ford F-350?
In order to replace the front brake pads of the Ford F-350 you have to go and lift the vehicle with a jack or a bridge, so that the corresponding wheel is not …read all…
Posted on 1 September 2022 by ScegliAuto
Ford F-350 (1999-2007 / Phn131)
How do you replace the rear brake pads of the Ford F-350?
In order to replace the rear brake pads of the Ford F-350 you have to remove the wheel corresponding to the pads to be replaced by loosening its fixing bolts. …read all…
Posted on 19 August 2022 by ScegliAuto
Ford F-350 (2017-2023 / P558)
How to replace the rear brake pads of the Ford F-350?
The replacement of the rear brake pads of the Ford F-350 is done by lifting the car with a jack or a bridge, so that the corresponding wheel is not in contact …read all…
Posted on 18 May 2022 by ScegliAuto
Loudspeaker (1) Shock absorbers (1) Car stereo (4) Battery (1) Key (7) V-belt (1) -board computer (2) Checks and maintenance (5) Dashboard (1) Bearing (2) Brake discs (2) Headlight (4) Fog lights (1) Air filter (7) Cabin air filter (3) Diesel filter (2) Light bulb (3) Headlight bulb (3) Rear light bulb (3) License plate light (1) Starter motor (1) Engine oil (5) Door panel (2) Front bumper (1) Rear bumper (1) Brake pads (3) Instrument cluster (2) Wheel (1) Fuse box (7) Suspensions (1) Outside rearview mirror (3) Windscreen wipers (1) Steering rods (1) Transmission (1) Windshield washer nozzle (1) Steering wheel (1)

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos