Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlights of the Ford F-350 PHN 131

Model: Ford F-350 Phn131 - Years 1999-2007
Part: Headlight

In this video, follow the main instructions on how to remove and replace the headlights of the Ford F-350 PHN 131 in simple steps. First, open the hood and start by removing the screws located on the inner part of the headlight; then remove the turn signal light located under the headlight by taking out the bulbs inside, as shown in the video. At this point, unscrew the side screws of the headlight to remove it, taking out the low beam bulb; all that’s left is to replace it with the new one, applying the reverse procedure.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Suspension on a Ford F-350 (2006)
How to Replace the Front Suspension on a Ford F-350 (2006)
Ford F-350 (1999-2007 / Phn131) In this video, you will see the main steps to remove and replace the front suspension on a 2006 Ford F-350. First, lift the vehicle and remove the fr…
How to Replace the Front Speakers in a Ford F-350 Pickup?
How to Replace the Front Speakers in a Ford F-350 Pickup?
Ford F-350 (1999-2007 / Phn131) In this tutorial, you will see how to replace the front speakers in a Ford F-350 pickup, a very simple and quick operation. First, ensure that the in…
Replacing the Front Speaker of the Ford F-350
Replacing the Front Speaker of the Ford F-350
Ford F-350 (1999-2007 / Phn131) Follow these main steps to remove and replace the front speaker of the Ford F-350. First, open the front door and start by removing the door panel; t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos