Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Filter on the Ford F-350

Model: Ford F-350 Phn131 - Years 1999-2007
Part: Diesel fuel filter

In this guide, follow the main steps to remove and replace the fuel filter on the Ford F-350. First, open the hood and start by loosening the cover of the fuel filter using a 24 mm socket wrench with an extension; then remove the cartridge inside and replace it with a new one, using the original part, as shown in the video. Properly insert the new filter, ensuring the gasket fits snugly on the sides; then reattach the cover, tightening it gently.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on a Ford F-350?
How to Replace the Fuel Filter on a Ford F-350?
Ford F-350 (2011-2016 / P473) The Ford F-350 has two fuel filters: the first is located at the bottom of the vehicle, near the engine compartment. It can be removed by disconnecti…
How to Replace the Belt and Tensioner on the Ford F-350 7.3L Diesel
How to Replace the Belt and Tensioner on the Ford F-350 7.3L Diesel
Ford F-350 (1992-1997 / 1992) In this video tutorial, you will learn how to remove and replace the serpentine belt and the belt tensioner on the Ford F-350 with a 7.3L Diesel engi…
How to Replace the Air Filter on a Ford F-350 Super Duty
How to Replace the Air Filter on a Ford F-350 Super Duty
Ford F-350 (1999-2007 / Phn131) In this video, see how to remove and replace the engine air filter on a Ford F-350 Super Duty by following these simple steps. First, open the hood a…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos