Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Ford F-350?

Model: Ford F-350 P473 - Years 2011-2016
Part: Diesel fuel filter

The Ford F-350 has two fuel filters: the first is located at the bottom of the vehicle, near the engine compartment. It can be removed by disconnecting the connector attached to the filter and unscrewing it to extract it from its housing. The second filter is located inside the engine compartment, just below the windshield in the center area. To remove the filter, disconnect the hoses connected to it and pull it out of its housing. Once the old filters are removed, you can install the new ones.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fuel Filter on the Ford F-350
Replacing the Fuel Filter on the Ford F-350
Ford F-350 (1999-2007 / Phn131) In this guide, follow the main steps to remove and replace the fuel filter on the Ford F-350. First, open the hood and start by loosening the cover o…
How to Replace the Cabin Air Filter in a Ford F-350?
How to Replace the Cabin Air Filter in a Ford F-350?
Ford F-350 (2017-2023 / P558) In this video, you can see how to replace the cabin air filter in the Ford F-350 pickup. For this operation, in addition to the correct replacement f…
How to Replace the Air Filter on a Ford F-350?
How to Replace the Air Filter on a Ford F-350?
Ford F-350 (2017-2023 / P558) To replace the air filter, open the hood, as the box containing the filter is located inside. More precisely, the box is on the left side of the engi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos