Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Galaxy
  6. : Rear bumper

Ford Galaxy - Rear bumper

Rear Bumper Ford Galaxy (2015-2023 / mk 3)

Ford Galaxy (2015-2023 / MK 3)
How do you remove the rear bumper of the Ford Galaxy?

In order to remove the rear bumper of the Ford Galaxy, you need to open the rear hatch so that you can access the screws next to the two headlights: once these …Read all…
Posted on 6 May 2025 by ScegliAuto
Ford Galaxy (2006-2015 / MK 2)
Removing the Rear Bumper of a Ford Galaxy

How to remove the rear bumper of a Ford Galaxy? This guide shows the removal process. First, take a screwdriver or battery-powered screwdriver and unscrew the …Read all…
Posted on 4 April 2026 by ScegliAuto

Rear Bumper Ford Galaxy (2006-2015 / mk 2)

Ford Galaxy (2015-2023 / MK 3)
How do you remove the rear bumper of the Ford Galaxy?

In order to remove the rear bumper of the Ford Galaxy, you need to open the rear hatch so that you can access the screws next to the two headlights: once these …Read all…
Posted on 6 May 2025 by ScegliAuto
Ford Galaxy (2006-2015 / MK 2)
Removing the Rear Bumper of a Ford Galaxy

How to remove the rear bumper of a Ford Galaxy? This guide shows the removal process. First, take a screwdriver or battery-powered screwdriver and unscrew the …Read all…
Posted on 4 April 2026 by ScegliAuto

Airbag (1) Car stereo (5) Battery (3) Control arm (2) Key (5) Timing belt (3) Checks and maintenance (2) Headlight (1) Tail light (1) Fog lights (3) Air filter (2) Cabin air filter (2) Diesel fuel filter (3) Oil filter (1) Parking brake (1) Headlight bulb (3) (1) Engine (1) Engine oil (3) Clock (1) Door trim panel (3) Rear bumper (2) Fuel pump (2) Instrument cluster (1) Fuse box (15) Seat (2) Side mirror (2) Warning light – error code (4) Tire pressure warning light (1) Service warning light (18) Center console tunnel (1)

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos