Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Galaxy
    4. : Timing belt

Ford Galaxy - Timing belt

Timing Belt Ford Galaxy (2006-2015 / mk 2)

Ford Galaxy (2006-2015 / MK 2)
How to replace the timing belt on the Ford Galaxy 2.0 TDCi?
The importance of replacing the timing belt at every kilometer or time interval set by the manufacturer is very high. This is because it is subject to wear and …Read all…
Posted on 20 January 2026 by ScegliAuto
Ford Galaxy (2006-2015 / MK 2)
Replacement of the timing belt of the Ford Galaxy 2.0 TDCi
Today we will discover the instructions that will allow us to disassemble and replace the timing belt of the Ford Galaxy 2.0 TDCi. First, lift the vehicle and …Read all…
Posted on 19 November 2025 by ScegliAuto
Ford Galaxy (2006-2015 / MK 2)
Replacing the Timing Belt on the Ford Galaxy 2.0 TDCi
Here are the main instructions for removing and replacing the timing belt on the Ford Galaxy 2.0 TDCi. To replace the timing belt, lift the vehicle; first, …Read all…
Posted on 8 September 2026 by ScegliAuto
Airbag (1) Car stereo (5) Battery (3) Control arm (2) Key (5) Timing belt (3) Checks and maintenance (2) Headlight (1) Tail light (1) Fog lights (3) Air filter (2) Cabin air filter (2) Diesel fuel filter (3) Oil filter (1) Parking brake (1) Headlight bulb (3) (1) Engine (1) Engine oil (3) Clock (1) Door trim panel (3) Rear bumper (2) Fuel pump (2) Instrument cluster (1) Fuse box (15) Seat (2) Side mirror (2) Warning light – error code (4) (1) Service warning light (17) Center console tunnel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos