Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on the Ford Galaxy 2.0 TDCi

Model: Ford Galaxy MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Timing belt

See other generations:
Video tutorial

Here are the main instructions for removing and replacing the timing belt on the Ford Galaxy 2.0 TDCi. To replace the timing belt, lift the vehicle; first, open the bonnet and start disconnecting the fuel filter pipes to remove it (this will allow you to later remove the timing cover).

Next, remove the front right wheel and disconnect the serpentine belt by removing the crankshaft pulley; take the necessary references for timing the engine, following the video tutorial to the end for reassembly!


Updated on 8 September 2026 by ScegliAuto


Related tutorials

Replacement of the timing belt of the Ford Galaxy 2.0 TDCi
Replacement of the timing belt of the Ford Galaxy 2.0 TDCi
Ford Galaxy (2006-2015 / MK 2) Today we will discover the instructions that will allow us to disassemble and replace the timing belt of the Ford Galaxy 2.0 TDCi. First, lift the ve…
How to replace the timing belt on the Ford Galaxy 2.0 TDCi?
How to replace the timing belt on the Ford Galaxy 2.0 TDCi?
Ford Galaxy (2006-2015 / MK 2) The importance of replacing the timing belt at every kilometer or time interval set by the manufacturer is very high. This is because it is subject t…
Guide to Replacing the Fuel Pump on the Ford Galaxy 2.0 TDCI
Guide to Replacing the Fuel Pump on the Ford Galaxy 2.0 TDCI
Ford Galaxy (2006-2015 / MK 2) Today, we will discover the procedure for dismantling and replacing the diesel pump on the Ford Galaxy 2.0 TDCI. First, open the rear doors and begin…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos