Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Fuel Pump on the Ford Galaxy 2.0 TDCI

Model: Ford Galaxy MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fuel pump

See other generations:
Video tutorial

Today, we will discover the procedure for dismantling and replacing the diesel pump on the Ford Galaxy 2.0 TDCI. First, open the rear doors and begin to dismantle and remove the rear seat by pulling it upwards; then remove the plastic cover to access the diesel pump, as shown in the video.

At this point, disconnect the fuel lines and the electric connector for the fuel level sensor; unscrew the pump collar to remove it from the tank, replacing it with the new original one. Reassemble and connect the various pump connections.


Updated on 8 October 2026 by ScegliAuto


Related tutorials

Replacement of the timing belt of the Ford Galaxy 2.0 TDCi
Replacement of the timing belt of the Ford Galaxy 2.0 TDCi
Ford Galaxy (2006-2015 / MK 2) Today we will discover the instructions that will allow us to disassemble and replace the timing belt of the Ford Galaxy 2.0 TDCi. First, lift the ve…
How to Replace the Diesel Filter on the Ford Galaxy 1.6 TDCi
How to Replace the Diesel Filter on the Ford Galaxy 1.6 TDCi
Ford Galaxy (2006-2015 / MK 2) Today's instructions will illustrate the procedure for removing and replacing the diesel filter on the Ford Galaxy 1.6 TDCi. First, open the vehicle'…
How to replace the battery of the Ford Galaxy 3 key
Ford Galaxy (2015-2023 / MK 3) To replace the small button battery located in the key of your Ford Galaxy Mk3 on your own, you must first carefully read the following guide and the…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos