Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump in the Ford Transit Fuel Tank

Model: Ford Transit MK 8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Fuel pump

See other generations:
Video tutorial

The main instructions in this guide will show you how to remove and replace the fuel pump in the Ford Transit. First, lift the vehicle to proceed with removing the fuel tank; you will need a jack or stands, then unscrew the tank bracket bolts and disconnect the fuel lines.

This will give you access to the fuel pump located above the tank; disconnect the connector from the float sensor and unscrew the pump retaining ring, removing it and replacing it with the new one.


Posted on 24 August 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Fuel Pump on the Ford Transit
How to Remove and Replace the Fuel Pump on the Ford Transit
Ford Transit (2014-2024 / MK 8) The following steps show how to remove and replace the fuel pump on the Ford Transit, following the instructions below. To access the fuel pump, it w…
How to Remove the Fuel Pump from the Ford Transit Connect
How to Remove the Fuel Pump from the Ford Transit Connect
Ford Transit (2006-2014 / MK 7) Follow the main steps for removing and replacing the fuel pump of the Ford Transit Connect. First, raise the vehicle and begin to disassemble and rem…
How to Reset the AdBlue Warning Light on the Ford Transit?
How to Reset the AdBlue Warning Light on the Ford Transit?
Ford Transit (2014-2024 / MK 8) To reset the AdBlue warning light on the Ford Transit, you need to top up the additive liquid by adding the required amount into its tank: to do this…

    Frequently Asked Questions

    • Transit 2006-2014 - Where is the Ford Transit inertia switch located? Read answer

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos