Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump from the Ford Transit Connect

Model: Ford Transit MK 7 - Years 2006-2014
Part: Fuel pump

Follow the main steps for removing and replacing the fuel pump of the Ford Transit Connect. First, raise the vehicle and begin to disassemble and remove the fuel tank by unscrewing the fixing screws of the brackets and disconnecting the various fuel lines and the filter; only then will you have access to the fuel pump, as shown in the video. At this point, unscrew the collar of the immersion pump to remove it from the tank, replacing it with the new original one, refitting the float and finally the tank!

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and replace the fuel pump of the Ford Transit
How to disassemble and replace the fuel pump of the Ford Transit
Ford Transit (2014-2024 / MK 8) The following steps will show us how to disassemble and replace the fuel pump of the Ford Transit, following the instructions below. To access the fu…
How to Replace the Fuel Pump in the Ford Transit Fuel Tank
How to Replace the Fuel Pump in the Ford Transit Fuel Tank
Ford Transit (2014-2024 / MK 8) The main instructions in this guide will show you how to remove and replace the fuel pump in the Ford Transit. First, lift the vehicle to proceed wit…
Where to Find the Fuse Box of the 2018 Ford Transit Connect
Where to Find the Fuse Box of the 2018 Ford Transit Connect
Ford Transit (2014-2024 / MK 8) If one or more fuses in your 2018 Ford Transit Connect are blown and you want to replace them, follow the instructions in this mini guide to easily l…

Other guides you may be interested in

    Frequently Asked Questions

    • Transit 2006-2014 - Where is the Ford Transit inertia switch located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos