Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front seat of the Ford Galaxy

Model: Ford Galaxy MK 2 - Years 2006-2015
Part: Seat

Below we will see the necessary steps on how to disassemble and replace the front seat of the Ford Galaxy, following the instructions provided. First, we open the front door of the vehicle and start unscrewing all the fixing screws we find on the front seat guides, moving it back and forth; then we disconnect the electrical connector found underneath, removing the seat from the cabin, as shown in the video. At this point, we clean or replace the seat, applying the reverse process for reassembly!

Posted on 23 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the instrument panel of the Ford Galaxy dashboard
How to disassemble the instrument panel of the Ford Galaxy dashboard
Ford Galaxy (2006-2015 / MK 2) Today's main instructions will show us how to disassemble and replace the instrument panel of the Ford Galaxy, as well as the Ford S-Max. First, we g…
How to Remove the Radio from a Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) Before you can start, sit in the driver's seat of your Ford Galaxy. Begin by prising off and removing the radio trim to expose the fixing screws. Nex…
Replacement of the timing belt of the Ford Galaxy 2.0 TDCi
Replacement of the timing belt of the Ford Galaxy 2.0 TDCi
Ford Galaxy (2006-2015 / MK 2) Today we will discover the instructions that will allow us to disassemble and replace the timing belt of the Ford Galaxy 2.0 TDCi. First, lift the ve…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos