Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the instrument panel of the Ford Galaxy dashboard

Model: Ford Galaxy MK 2 - Years 2006-2015
Part: Instrument cluster

Today's main instructions will show us how to disassemble and replace the instrument panel of the Ford Galaxy, as well as the Ford S-Max. First, we get into the cabin and start by removing the plastic cover on the bottom of the panel, taking out the plastic clips at the bottom; then we unscrew the fastening screws of the instrument panel, disconnecting the electrical wiring on the back to remove it, as shown in the video. At this point, if necessary, we replace the instrument panel, following the video tutorial until the end!

Posted on 9 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Ford Galaxy?
How to Reset the Service Light on a Ford Galaxy?
Ford Galaxy (2006-2015 / MK 2) To reset the Service light on a Ford Galaxy, turn on the ignition by inserting the key into the ignition switch. Once the dashboard is lit, press and…
How to Replace the Standard Radio in a Ford Galaxy
How to Replace the Standard Radio in a Ford Galaxy
Ford Galaxy (2015-2023 / MK 3) The instructions in this guide will help you remove and replace the standard radio in a Ford Galaxy. First, get inside the vehicle and start by remov…
How to disassemble the console and the central tunnel of the Ford Galaxy
How to disassemble the console and the central tunnel of the Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) The following steps will show us how to disassemble the console and the central tunnel of the Ford Galaxy. First, we get into the cabin and start by …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos