Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the timing belt of the Ford Galaxy 2.0 TDCi

Model: Ford Galaxy MK 2 - Years 2006-2015
Part: Timing belt

Today we will discover the instructions that will allow us to disassemble and replace the timing belt of the Ford Galaxy 2.0 TDCi. First, lift the vehicle and start by disassembling the front right wheel and the wheel arch; disconnect the belt from the crankshaft pulley, then remove the pulley (by unscrewing the central bolt), as shown in the video. At this point, remove the distribution cover to proceed with the removal of the timing belt, replacing it with the new original one; also replace the water pump kit and reassemble all the other components.

Posted on 19 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on the Ford Galaxy 2.0 TDCi
Replacing the Timing Belt on the Ford Galaxy 2.0 TDCi
Ford Galaxy (2006-2015 / MK 2) Here are the main instructions for removing and replacing the timing belt on the Ford Galaxy 2.0 TDCi. To replace the timing belt, lift the vehicle; …
How to replace the timing belt on the Ford Galaxy 2.0 TDCi?
How to replace the timing belt on the Ford Galaxy 2.0 TDCi?
Ford Galaxy (2006-2015 / MK 2) The importance of replacing the timing belt at every kilometer or time interval set by the manufacturer is very high. This is because it is subject t…
Guide to replacing the fuel pump of the Ford Galaxy 2.0 TDCI
Guide to replacing the fuel pump of the Ford Galaxy 2.0 TDCI
Ford Galaxy (2006-2015 / MK 2) Today we will discover the process of how to disassemble and replace the diesel pump of the Ford Galaxy 2.0 TDCI. First of all, we open the rear door…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos