|
Do it yourself
| |||
| ||||
How to replace the rear headlight bulb of the 2011 Ford Fiesta
Model: Ford Fiesta
Fiesta 6, MK 6, MK VI
- Years 2008-2017
With the help of the following video tutorials, we will explain how to replace the rear headlight bulb of a 2011 Ford Fiesta gasoline vehicle. To perform the bulb replacement, we need to open the trunk and use a torque wrench to unscrew the two bolts located on the side of the headlight. Then it is necessary to release the plastic clip located on the carpet block, in order to move the side carpet and access the internal compartment of the headlight. Disconnect the connector and remove the headlight from its seat, disassemble the light fixture and replace the non-functioning bulb. After inserting the bulb, assemble the light fixture and insert the headlight back into its seat. Connect the connector and position the carpet. Using the gap, lock the side part of the carpet and screw the two side bolts to secure the headlight.
Posted on 22 February 2025 by ScegliAuto
Video tutorial
Related tutorials
Ford Fiesta
(2017-2023 /
MK 7, MK VII, Fiesta 7)
The following video guide will provide us with the tools to independently replace the rear light bulbs of the Ford Fiesta mk8. Let's start the replac…
Ford Fiesta
(2008-2017 /
Fiesta 6, MK 6, MK VI)
Thanks to the procedure described in the following mini guide, you will be able to successfully replace the faulty bulb inside the rear headlight of …
Ford Fiesta
(2008-2017 /
Fiesta 6, MK 6, MK VI)
Replacing the right front headlight bulb of the Ford Fiesta is a simple operation that can be done independently. To replace the bulb, we must: - ope…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.127
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |