Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Ford Fiesta

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Tail light bulb

The following video guide will provide us with the tools to independently replace the rear light bulbs of the Ford Fiesta mk8. Let's start the replacement by getting not only the new bulb but also a needle-nose pliers and a flat-head screwdriver. Proceed with opening the trunk and removing the side part of the carpet corresponding to the lights, unscrewing the screws. Open the headlight compartment to disconnect the connector and remove the headlight. Remove the cover of the dome light and replace the bulb. Perform the same steps on the right rear light. Finish by mounting the headlight in its housing and testing the bulb's functionality.

Posted on 14 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Bulb on the Ford Fiesta?
How to Replace the Rear Bulb on the Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To replace the rear bulb on the Ford Fiesta, open the tailgate to access the two screws next to the light: by loosening these screws and also unscrew…
How to Change the Rear Light Bulb on the Ford Fiesta
How to Change the Rear Light Bulb on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, we will go through the main steps to remove and replace the bulbs of the rear light on the Ford Fiesta. First, open the boot lid and s…
How to replace the rear headlight bulb of the Ford Fiesta 6
How to replace the rear headlight bulb of the Ford Fiesta 6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Thanks to the procedure described in the following mini guide, you will be able to successfully replace the faulty bulb inside the rear headlight of …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos