Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove condensation inside the front headlight of the Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight

See other generations:
Video tutorial

The following steps will show us how to remove condensation inside the front headlight of the Ford Focus. First, it is necessary to disassemble and remove the headlight assembly, unscrewing the fixing screws and disconnecting the electrical connector of the bulbs; then we remove all the lights from the headlight to remove any water residue, drying all the condensation we find inside, as shown in the video.

At this point, we replace the front headlight if damaged, reassembling the bulbs; we make the electrical connection and fix the headlight with all its screws.


Posted on 14 September 2025 by ScegliAuto


Related tutorials

How to Change the Bulb on Ford Focus Zetec
Ford Focus (2004-2011 / MK 2, Focus 2) Are the front headlight bulbs due for a change? Here’s how to remove the front headlight bulbs on a Focus. Lift the cover bonnet, locate the front he…
How to replace the front headlight bulb of the 2016 Ford Focus
How to replace the front headlight bulb of the 2016 Ford Focus
Ford Focus (2011-2018 / MK 3) If you own a Ford Focus Mk3 (year 2016) and want to replace one of the bulbs in the front headlight on your own, then all you have to do is carefully…
How to Replace the Headlight Bulbs of a Ford Focus
How to Replace the Headlight Bulbs of a Ford Focus
Ford Focus (2011-2018 / MK 3) Let’s see how to replace the bulbs inside the front headlight of a Ford Focus. Lift the front bonnet by pulling the lever located at the bottom right…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos