Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the front headlight on a Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Headlight

Disassembling the front headlight of this type of car is quite simple, you just need to have a little patience. Start by opening the hood and look for the fixing screws of the headlight, which are usually two or three. Use a socket wrench or a screwdriver to unscrew them calmly, without forcing. Now comes the somewhat delicate part: the headlight is still attached with clips, so pull it towards you decisively, but without exaggerating, otherwise you could break something. Disconnect the electrical connectors being careful not to damage the wires. There you go, the headlight is free! If you need to replace it or change a bulb, now you can work on it comfortably. To reassemble it, follow the same procedure in reverse.

Posted on 19 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front headlight of the Ford Focus
How to disassemble the front headlight of the Ford Focus
Ford Focus (1998-2004 / MK 1) The following steps will show us how to disassemble and replace the front headlight of the Ford Focus, following the instructions below. First, we op…
How to remove condensation inside the front headlight of the Ford Focus
How to remove condensation inside the front headlight of the Ford Focus
Ford Focus (2011-2018 / MK 3) The following steps will show us how to remove condensation inside the front headlight of the Ford Focus. First, it is necessary to disassemble and r…
Removing the Headlight on Ford Focus
Removing the Headlight on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Want to remove the front headlight from the Ford Focus? The headlight is secured with retaining screws, so let’s see how to do it. Unscrew the retain…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos