Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disconnect the 12 Volt battery on a Ford Kuga Hybrid PHEV

Model: Ford Kuga MK 3 - Years 2020-2026
Part: Battery

In this video we see how to disconnect the 12 Volt battery on a Ford Kuga Phev: this intervention may be necessary to carry out maintenance on the vehicle's electrical system safely, or to prevent it from discharging in case of long inactivity of the vehicle; furthermore, it could be useful to reset electrical problems, and thus solve small malfunctions, as well as to physically replace the battery. The battery is located under the trunk floor; we disconnect and isolate the positive pole. Under the hood, on the passenger side, we find a green plug with a red safety clip: we pull this clip, push the green plug until a small hole is visible on the left side of the plug, where we will put a safety strap, as the plug cannot be removed. We cannot work on the car until ten minutes have passed from this operation.

Posted on 22 September 2025 by ScegliAuto

Video tutorial

Related tutorials

What Does the "L" Mean on the Gear Selector of the Ford Kuga PHEV?
What Does the "L" Mean on the Gear Selector of the Ford Kuga PHEV?
Ford Kuga (2020-2026 / MK 3) The "L" on the gear selector of the Ford Kuga PHEV (and hybrids) stands for "Lock" and is referred to as the engine braking gear or enhanced engine b…
How to reset the oil indicator light on the Ford Kuga Hybrid
How to reset the oil indicator light on the Ford Kuga Hybrid
Ford Kuga (2020-2026 / MK 3) In this new guide you will find the description of all the various steps you need to follow if you intend to perform the manual reset of the engine o…
How to Replace the Battery in the Ford Kuga?
How to Replace the Battery in the Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) In this tutorial, you will see how to replace the battery in the Ford Kuga, a very simple operation. First, ensure that the key is not inserted, then…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos