|
Do it yourself
| |||
| ||||
Maintenance tips for the Ford Transit
Model: Ford Transit
MK 7
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
There are some maintenance tasks on the Ford Transit that need to be done and precautions we need to make sure of: first of all, we check that the front pillars have been installed correctly and do not wobble; sometimes they are not securely attached and can break; we pay close attention to where we position the jack for lifting the vehicle, following the instructions provided in the owner's manual. Otherwise, we risk causing serious damage to the lower axles. The spare wheel is normally fixed under the vehicle, so we are careful when we reassemble it in place, and also when we temporarily fix it without the wheel, as we could damage the mechanism. The DPF is difficult to remove with the fuel tank in place, and to change the bulbs we will need to remove the headlights, but this is a simple job. Additionally, many of these Ford Transits have foldable external mirrors that vibrate, and the only solution is a visit to the dealership for a firmware update, and the 2.2 engine has been subject to a recall by the Manufacturer. We always keep an eye on the injectors of our Ford Transit.
Posted on 9 November 2025 by ScegliAuto
Related tutorials
Ford Transit
(2006-2014 /
MK 7)
In this guide, you will discover where the fuse box is located inside your Ford Transit Mk7 (2006-2014) and what you need to do to access the fuses f…
Ford Transit
(2000-2006 /
MK 6)
In today's video, learn how to reset the service light on the Ford Transit. First, ensure you perform the correct maintenance as outlined in the vehi…
Ford Transit
(2014-2024 /
MK 8)
To reset the "Service" light on a Ford Transit, start by turning on the ignition. Next, enter the onboard computer using the controls on the steering…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?
Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.047
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |